2004 Mazda Tribute; Owners Guide (post-2002-fmt); WARNING: Handle a halogen headlamp bulb carefully and keep- Page 53

2004 Mazda Tribute Owners Manaul

Model Year
2014 Dodge Charger SRT Owner Manual
background image

3. Disconnect the electrical

connector from the bulb by
pulling rearward.

4. Remove the rubber boot from

the lamp assembly by pulling on
one of the tabs.

5. Squeeze the retainer spring

together releasing it from bulb
hooks and rotate it away from
the bulb.

6. Without turning, carefully pull bulb out of headlamp assembly.

WARNING: Handle a halogen headlamp bulb carefully and keep
out of children’s reach. Grasp the bulb only by its plastic base
and do not touch the glass. The oil from your hands could cause
the bulb to break the next time the headlamps are operated.
Always wear safety glasses while handling bulbs.

NOTE

: If the bulb is accidentally touched, it should be cleaned with

rubbing alcohol before being used.

7. Insert the glass end of the new bulb into the headlamp assembly.

When the bulb’s three metal tabs are aligned with the grooves in the
plastic base, push the bulb into the lamp assembly until the bulb’s
metal base contacts the rear of the lamp assembly.

8. Rotate the retainer spring over the bulb plastic base and secure it on

the bulb hooks.

9. Install rubber boot on the lamp assembly.

10. Connect the electrical connector into the rear of the plastic base

until it “snaps.”

2004 Mazda Tribute

(j14)

Owners Guide (post-2002-fmt)
USA English

(fus)

Lights

53

Detailed Information for 2004 Mazda Tribute Owners Manaul

Lists of information found in 2004 Mazda Tribute Owners Manaul - Page 53

  • 3. Disconnect the electrical connector from the bulb by pulling rearward.
  • 4. Remove the rubber boot from the lamp assembly by pulling on one of the tabs.
  • 5. Squeeze the retainer spring together releasing it from bulb hooks and rotate it away from the bulb.
  • 6. Without turning, carefully pull bulb out of headlamp assembly.
  • 7. Insert the glass end of the new bulb into the headlamp assembly.
  • 8. Rotate the retainer spring over the bulb plastic base and secure it on the bulb hooks.
  • 9. Install rubber boot on the lamp assembly.