2004 Mazda Tribute; Owners Guide (post-2002-fmt); Replacing brake/tail/turn/backup lamps bulbs- Page 54

2004 Mazda Tribute Owners Manaul

Model Year
2014 Dodge Charger SRT Owner Manual
background image

Replacing brake/tail/turn/backup lamps bulbs

The brake/tail/turn/backup lamp bulbs are located in the tail lamp
assembly, one just below the other. Follow the same steps to replace
either bulb:

1. Open the liftgate to expose the

lamp assemblies.

2. Remove the two screws from

the lamp assembly.

3. Carefully remove the lamp

assembly by pulling it rearward.

4. Twist the bulb socket

counterclockwise and remove
from lamp assembly.

5. Pull the bulb straight out of the

socket and push in the new
bulb.

6. To complete installation, follow

the removal procedure in
reverse order.

Replacing front parking/turn signal lamp bulbs

1. Make sure that the headlamp control is in the OFF position.

2. Open the hood. The position lamps are located on the bottom half of

each headlamp.

3. Disconnect the electrical connector from the bulb by pulling

rearward.

4. Remove the bulb socket from the lamp assembly by turning

counterclockwise.

2004 Mazda Tribute

(j14)

Owners Guide (post-2002-fmt)
USA English

(fus)

Lights

54

Detailed Information for 2004 Mazda Tribute Owners Manaul

Lists of information found in 2004 Mazda Tribute Owners Manaul - Page 54

  • 1. Open the liftgate to expose the lamp assemblies.
  • 2. Remove the two screws from the lamp assembly.
  • 3. Carefully remove the lamp assembly by pulling it rearward.
  • 4. Twist the bulb socket counterclockwise and remove from lamp assembly.
  • 5. Pull the bulb straight out of the socket and push in the new bulb.
  • 6. To complete installation, follow the removal procedure in reverse order.
  • 1. Make sure that the headlamp control is in the OFF position.
  • 2. Open the hood.
  • 3. Disconnect the electrical connector from the bulb by pulling rearward.
  • 4. Remove the bulb socket from the lamp assembly by turning counterclockwise.