2004 Mazda Tribute; Owners Guide (post-2002-fmt); Replacing fog lamp bulbs (if equipped)- Page 55

2004 Mazda Tribute Owners Manaul

Model Year
2014 Dodge Charger SRT Owner Manual
background image

5. Pull the bulb straight out of the

socket and push in the new
bulb.

6. To complete installation, follow

the removal procedure in
reverse order.

Replacing fog lamp bulbs (if equipped)

1. Remove the bulb socket from

the fog lamp by turning
counterclockwise.

2. Disconnect the electrical

connector from the fog lamp bulb.

3. Connect the electrical connector to the new fog lamp bulb.
4. Install the bulb socket in the fog lamp turning clockwise.

WARNING: Handle a halogen headlamp bulb carefully and keep
out of children’s reach. Grasp the bulb only by its plastic base
and do not touch the glass. The oil from your hands could cause
the bulb to break the next time the headlamps are operated.
Always wear safety glasses while handling bulbs.

NOTE

: If the bulb is accidentally touched, it should be cleaned with

rubbing alcohol before being used.

Replacing license plate lamp bulbs

1. Remove two screws and the

license plate lamp assembly
(located above the license
plate) from the liftgate.

2. Remove bulb socket from lamp

assembly by turning
counterclockwise.

3. Pull the bulb out from the socket

and push in the new bulb.

4. Install the bulb socket in lamp

assembly turning it clockwise,

5. Install the lamp assembly on liftgate with two screws.

Replacing high-mount brake lamp bulbs

For bulb replacement, see an authorized Mazda dealer.

2004 Mazda Tribute

(j14)

Owners Guide (post-2002-fmt)
USA English

(fus)

Lights

55

Detailed Information for 2004 Mazda Tribute Owners Manaul

Lists of information found in 2004 Mazda Tribute Owners Manaul - Page 55

  • 5. Pull the bulb straight out of the socket and push in the new bulb.
  • 6. To complete installation, follow the removal procedure in reverse order.
  • 1. Remove the bulb socket from the fog lamp by turning counterclockwise.
  • 2. Disconnect the electrical connector from the fog lamp bulb.
  • 3. Connect the electrical connector to the new fog lamp bulb.
  • 4. Install the bulb socket in the fog lamp turning clockwise.
  • 1. Remove two screws and the license plate lamp assembly (located above the license plate) from the liftgate.
  • 2. Remove bulb socket from lamp assembly by turning counterclockwise.
  • 3. Pull the bulb out from the socket and push in the new bulb.
  • 4. Install the bulb socket in lamp assembly turning it clockwise, 5.