WARNING: To reduce the risk of injury, do not; deactivate/activate the Belt Minder feature while driving the; Safety belt maintenance- Page 91

2005 Mazda Tribute Owners Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

background image

WARNING: To reduce the risk of injury, do not
deactivate/activate the Belt Minder feature while driving the
vehicle.

1. Turn the ignition switch to the RUN (or ON) position. (DO NOT

START THE ENGINE)

2. Wait until the safety belt warning light turns off. (Approximately 1

minute)

Step 3 must be completed within 50 seconds after the safety belt
warning light turns off.

3. For the seating position being disabled, buckle then unbuckle the

safety belt 9 times, ending in the unbuckled state. (Step 3 must be
completed within 50 seconds after the safety belt warning light turns
off.)

After Step 3, the restraint system warning light (airbag light) will be
turned on for three seconds.

4. Within 10 seconds of the light turning on, buckle then unbuckle the

safety belt.

This will disable the BeltMinder

y

feature for that seating position if it

is currently enabled. As confirmation, the restraint system warning
light will flash 4 times per second for 3 seconds.

This will enable the BeltMinder

y

feature for that seating position if it

is currently disabled. As confirmation, the restraint system warning
light will flash 4 times per second for 3 seconds, followed by 3
seconds with the light off, then followed by the restraint system
warning light flashing 4 times per second for 3 seconds again.

After receiving confirmation, the deactivation/activation procedure is
complete.

Safety belt maintenance

Inspect the safety belt systems periodically to make sure they work
properly and are not damaged.

NOTE:

If unsure about the proper procedures, bring your vehicle to an

authorized Mazda dealership for inspection. Inspect the safety belts to
make sure there are no nicks, tears or cuts, replacing if necessary. Check
all automatic locking retractors on all outboard seating positions as well
as the automatic locking mode for child safety seats on the passenger
front belt. All safety belt assemblies, including retractors, buckles, front

Seating and Safety Restraints

91

Detailed Information for 2005 Mazda Tribute Owners Manual

Lists of information found in 2005 Mazda Tribute Owners Manual - Page 91

  • 1. Turn the ignition switch to the RUN (or ON) position.
  • 2. Wait until the safety belt warning light turns off.
  • 3. For the seating position being disabled, buckle then unbuckle the safety belt 9 times, ending in the unbuckled state.
  • 4. Within 10 seconds of the light turning on, buckle then unbuckle the safety belt.
  • Step 3 must be completed within 50 seconds after the safety belt warning light turns off.
  • After Step 3, the restraint system warning light (airbag light) will be turned on for three seconds.
  • This will disable the BeltMinder y feature for that seating position if it is currently enabled.
  • This will enable the BeltMinder y feature for that seating position if it is currently disabled.
  • After receiving confirmation, the deactivation/activation procedure is complete.