Wiper Blade Replacement; Vehicle Care; Front Wiper Blade- Page 224

2014 Buick encore Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

In Brief
Seats and Restraints
Instruments and Controls
Driving and Operating
Vehicle Care
background image

Black plate (22,1)

Buick Encore Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

6014813) - 2014 - crc - 10/22/13

10-22

Vehicle Care

.

To check the parking brake's
holding ability: With the engine
running and the transmission in
N (Neutral), slowly remove foot
pressure from the regular brake
pedal. Do this until the vehicle is
held by the parking brake only.

.

To check the P (Park)
mechanism's holding ability:
With the engine running, shift to
P (Park). Then release the
parking brake followed by the
regular brake.

Contact your dealer if service is
required.

Wiper Blade Replacement

Windshield wiper blades should be
inspected for wear and cracking.
See

Maintenance Schedule on

page 11-2

.

Replacement blades come in
different types and are removed in
different ways. For proper type and
length, see

Maintenance

Replacement Parts on page 11-12

.

{

Caution

Allowing the wiper arm to touch
the windshield when no wiper
blade is installed could damage
the windshield. Any damage that
occurs would not be covered by
your warranty. Do not allow the
wiper arm to touch the windshield.

Front Wiper Blade
Replacement

To replace the front wiper blades:

1. Lift the wiper arm from the

windshield until no further
movement is possible.

2. Press the release button on the

top side of the wiper and pull the
wiper blade out of the end of the
wiper arm.

3. Install the wiper blade connector

by sliding into the end of the
wiper arm until the button on the
wiper blade clicks into place with
the wiper arm.

4. Place the wiper arm with the

wiper blade in place back on the
windshield.

Detailed Information for 2014 Buick encore Owner Manual

Lists of information found in 2014 Buick encore Owner Manual - Page 224

  • 1. Lift the wiper arm from the windshield until no further movement is possible.
  • 2. Press the release button on the top side of the wiper and pull the wiper blade out of the end of the wiper arm.
  • 3. Install the wiper blade connector by sliding into the end of the wiper arm until the button on the wiper blade clicks into place with the wiper arm.
  • 4. Place the wiper arm with the wiper blade in place back on the windshield.