Automatic Transmission ; Electric Parking Brake ; Driver Shift Control- Page 17

17

Automatic Transmission  

Electric Parking Brake     

Driver Shift Control

Driver Shift Control is a manual mode that 

allows the driver to shift gears manually. 

This feature can be used to limit the top 

gear and vehicle speed or to downshift 

when driving on a downhill grade to provide 

engine braking. 
1.  Move the shift lever left to the L (Low) 

position. 

2.  Press the 

+

 (plus) or 

–

 (minus) button on 

the shift lever to upshift or downshift. 

The current gear will be displayed on the Driver Information Center. 

If vehicle speed is too high or too low for the requested gear, the shift will not occur.

See Driving and Operating in your Owner Manual.

  To apply the parking brake, pull the  

Parking Brake

 switch.

  To release the parking brake, turn on the 

ignition, press the brake pedal, and then 

press the 

switch.

Note: 

The parking brake will release automatically 

if the vehicle is running, placed into gear and an 

attempt is made to drive.

See Driving and Operating in your Owner Manual.

Tire Pressure Monitor

The 

Low Tire Pressure

 warning light on the instrument cluster illuminates when one 

or more of the vehicle’s tires is significantly underinflated. Fill the tires to the proper tire 

pressures listed on the Tire and Loading Information label located below the driver’s door 

latch. Current tire pressures can be viewed in the Driver Information Center.

See Vehicle Care in your Owner Manual.