Note: ; Adaptive Forward Lighting; Instrument Panel Lighting- Page 15

15

Lighting

IntelliBeam System

F

The IntelliBeam system automatically turns the high-beam headlamps on/off based on 

traffic conditions. A green 

indicator displays on the instrument cluster when the 

 system is on; a blue 

indicator displays when the high-beam headlamps are on.

  Turn the lamp control to the AUTO 

position to turn the automatic high-beam  system 

on or off.

Note: 

IntelliBeam activates the high-beam headlamps only when driving over 25 mph. The system is 

turned off if the high/low-beam changer or the flash-to-pass feature is used. Activate the high/low-

beam changer twice in 2 seconds to turn on the system.

Adaptive Forward Lighting

F

The system pivots the headlamps left or right in the direction of travel.

Note: 

The system operates only when the exterior lamps control knob is in the AUTO position, 

at speeds greater than 2 mph, and after driving a short distance to calibrate the system.

Instrument Panel Lighting

  Rotate and hold the   thumbwheel to adjust the instrument panel lighting.

See Lighting in your Owner Manual.

F

Optional equipment

Exterior Lamps

Rotate the knob to activate the  

exterior lamps.

Off/On
AUTO Automatic Headlamp System 

Automatically activates the Daytime 

Running Lamps (DRLs) or the headlamps 

and other exterior lamps depending on 

outside light conditions.

 Parking Lamps

 Headlamps

 Fog Lamps 

Press to turn the fog lamps on or off. 

Electric Parking Brake     

  To apply the parking brake, pull the  

Parking Brake

 switch.

  To release the parking brake, turn on the 

ignition, press the brake pedal, and then 

press the 

switch.

Note: 

The parking brake will release automatically 

if the vehicle is running, placed into gear and an 

attempt is made to drive.

See Driving and Operating in your Owner Manual.