Delayed Locking; Key Fob Feedback; Personalizing the DIC (if equipped)- Page 5

5

E/M (English/Metric):

On the base DIC,

press to choose English or Metric units.

On uplevel DICs, press the  (Option)

button until UNITS appears. Press the 

(Set/Reset) button to choose English

or Metric units.

(Set/Reset)

(if equipped): Press to

set/reset certain functions and to turn

off/acknowledge DIC messages. 

(Gauges)

(if equipped): Press to dis-

play battery and oil life. To reset the Oil

Life System after an oil change, press

and hold the  button while OIL LIFE

is displayed until it shows 100%.

(Fuel)

(if equipped): Press to display

fuel range and average economy.

(Option

) (if equipped): Press to dis-

play English/Metric units, language, 

personalization, compass zone and

compass calibration.

(Traction Control)

(if equipped):

Press to turn traction control on or off.

(Hazard):

Press to turn the hazard

warning flashers on or off.

Personalizing the DIC (if equipped)

Uplevel DICs can memorize selected

personalized settings for up to two 

drivers. (Some features are limited to a

single setting.) 

1. Place the vehicle in Park (P) and turn 

on the ignition.

2. Press the  (Option) button until 

PERSONAL PROGRAM is 

displayed.

3. Press the  (Set/Reset) button 

to display instructions.

4. Press the  button to display 

programmable features. 

5. Press the  button to change the

setting of each feature.

Your ignition key identifies you to the

vehicle.

Two keys can be programmed

for certain features that correspond to

each driver. To personalize a key:

1. From the Personal Program menu,

press the  (Option) button until 

PERSONALIZE KEY is displayed. 

2. Press the  (Set/Reset) button until

YES is displayed.

3. Press the  button.

Personalization Features include:

Delayed Locking

— Delays locking

of the vehicle doors for up to five 

seconds after the last door is closed.

Two chimes will sound when the power

door lock switch or the Lock button on

the Remote Keyless Entry transmitter

is pressed when a door is open. To

program:

1. From the Personal Program menu,

press the  (Option) button until

DELAYED LOCKING is displayed. 

2. Press the  (Set/Reset) button until

ON or OFF appears. 

3. Press the  button to select it. 

The ignition key must be removed for

the feature to work after programming. 

Key Fob Feedback

— Choose from Off

(no feedback), Lights (exterior lights

flash) or Lights and Horn when you

press the Remote Keyless Entry trans-

mitter (key fob) Lock button. To program:

1. From the Personal Program menu,

press the  (Option) button until 

FOB LOCK FEEDBACK is displayed.

2. Press the  (Set/Reset) button until

the desired setting is displayed.

3. Press the  button to save the 

setting.

LaCrosse 2007 A.qxd  4/25/06  11:14 AM  Page 5