Transmitter Battery; Keys, Doors, and Windows; Starting the Vehicle with a Low- Page 34

2016 Buick LaCrosse Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

In Brief
Seats and Restraints
Instruments and Controls
Driving and Operating
Vehicle Care
background image

Buick LaCrosse Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

9159288) - 2016 - CRC - 10/5/15

Keys, Doors, and Windows

33

4. Place the new transmitter into

the transmitter pocket inside
the armrest storage area.

5. Press the ENGINE START/

STOP button. When the
transmitter is learned the DIC
will show that it is ready to
program the next transmitter.

6. Remove the transmitter from

the transmitter pocket and
press

K

.

To program additional
transmitters, repeat Steps 4

6.

When all additional transmitters
are programmed, press and
hold the ignition for 12 seconds
to exit programming mode.

Starting the Vehicle with a Low
Transmitter Battery

When starting the vehicle, if the
transmitter battery is weak or there
is interference with the signal, the
DIC may display NO REMOTE
DETECTED or NO REMOTE KEY
WAS DETECTED, PLACE KEY IN
TRANSMITTER POCKET, THEN
START YOUR VEHICLE. The
REPLACE BATTERY IN REMOTE
KEY message may also be
displayed at this time.

To start the vehicle:

1. Place the transmitter in the

transmitter pocket inside the
armrest storage area.

2. With the vehicle in P (Park) or

N (Neutral), press the brake
pedal and the ENGINE START/
STOP button. See

Starting the

Engine

0

178

for additional

information about the vehicle's
keyless ignition with
pushbutton start.

Replace the transmitter battery
as soon as possible.

Detailed Information for 2016 Buick LaCrosse Owner Manual

Lists of information found in 2016 Buick LaCrosse Owner Manual - Page 34

  • 4. Place the new transmitter into the transmitter pocket inside the armrest storage area.
  • 5. Press the ENGINE START/ STOP button.
  • 6. Remove the transmitter from the transmitter pocket and press K .
  • 6. When all additional transmitters are programmed, press and hold the ignition for 12 seconds to exit programming mode.
  • 1. Place the transmitter in the transmitter pocket inside the armrest storage area.
  • 2. With the vehicle in P (Park) or N (Neutral), press the brake pedal and the ENGINE START/ STOP button.