Sun Visors; Power Safety Locks; Keys, Doors, and Windows- Page 52

2012 Buick Regal Getting To Know Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

In Brief
Seats and Restraints
Instruments and Controls
Driving and Operating
Vehicle Care
Customer Information
background image

Black plate (18,1)

Buick Regal Owner Manual - 2012

2-18

Keys, Doors, and Windows

restore power to the rear windows,
press the button again. The light on
the button goes out. If the light
flashes, the feature may not be
working properly.

Rear Window Lockout without
Power Safety Locks

For vehicles without power safety
locks, the rear window lockout
switch is on the driver door. This
feature prevents the rear passenger
windows from operating, except
from the driver position.

Press

v

to activate the rear window

lockout switch. An LED comes on
when activated.

Press

v

again to deactivate the

lockout switch.

If the LED flashes, the feature may
not be working properly.

Programming the Power
Windows

If the battery on the vehicle has
been recharged, disconnected, or
is not working, you will need to
reprogram each front power window
for the express-up feature to work.
Before reprogramming, replace or
recharge the vehicle's battery.

To program each front window:

1. The ignition is in ACC/

ACCESSORY or ON/RUN,
or Retained Accessory
Power (RAP).

2. Press and hold the power

window switch until the window
is fully open.

3. Pull the power window switch up

until the window is fully closed.

4. Continue holding the switch up

for approximately two seconds
after the window is completely
closed.

The window is now reprogrammed.
Repeat the process for the other
windows.

Sun Visors

Pull the sun visor down to block
glare. Detach the sun visor from the
center mount to pivot to the side
window, or to extend along the rod,
if available.

Detailed Information for 2012 Buick Regal Getting To Know Manual

Lists of information found in 2012 Buick Regal Getting To Know Manual - Page 52

  • 1. The ignition is in ACC/ ACCESSORY or ON/RUN, or Retained Accessory Power (RAP).
  • 2. Press and hold the power window switch until the window is fully open.
  • 3. Pull the power window switch up until the window is fully closed.
  • 4. Continue holding the switch up for approximately two seconds after the window is completely closed.