Remote Keyless Entry Transmitter; Unlock ; Lock - Page 4

4

Remote Keyless Entry Transmitter

Unlock 

Press once to unlock the driver’s door only
or press twice to unlock all doors.

Lock 

Press to lock all doors. The driver’s door
will not lock if open. 

Note: THE REMOTE LOCK AND UNLOCK
SETTINGS CAN BE CHANGED IN THE
VEHICLE SETTINGS MENU BY USING THE
AUDIO SYSTEM CONTROLS.

Vehicle Locator/Panic Alarm 

Press and release to locate your vehicle.
Press and hold for two seconds to activate
the alarm. Press the button again or turn
on the ignition to cancel the alarm.

Power Door Locks/Door Opening

• Press the power door 

Unlock/

Lock

button in the center of the instrument panel

to unlock or lock all doors.

• To open a locked door from the inside, pull the door handle to unlock the door and then

pull the handle again to open the door. 

• To prevent a rear door from opening from the inside, activate the 

Rear Door

Security Lock

. See your Owner Manual for more information.

See Keys, Doors and Windows in your Owner Manual. 

Trunk Release 

Press and hold to unlatch the trunk.

Remote Vehicle Start

✦

Press and release the 

Lock

button and

then press and hold the 

button to start

the engine from outside the vehicle. After
entering the vehicle, turn the ignition to the
On position before driving.
– The engine will run for 10 minutes.

Repeat these steps for a 10-minute
time extension. 

– Only two remote starts are allowed

between ignition cycles. 

– Press and hold the 

button to cancel

a remote start. 

See Keys, Doors and Windows in your Owner Manual.

Express Power Windows

• All windows have an express-down feature. Fully press the desired window switch for

the window to lower automatically.

• The front windows have an express-up feature. Fully pull the desired front window

switch for the window to go up automatically.

• To partially open a window, gently press and hold the appropriate switch until the

 window reaches the desired position.

Note: IF VEHICLE BATTERY POWER IS LOST, THE WINDOWS MUST BE RE-PROGRAMMED
FOR THE EXPRESS-UP FEATURE TO OPERATE. FOLLOW THE OWNER MANUAL
PROCEDURE. 

See Keys, Doors and Windows in your Owner Manual.