Sun Visors; Roof; Sunroof- Page 52

2014 Buick Regal Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

In Brief
Seats and Restraints
Instruments and Controls
Driving and Operating
Vehicle Care
background image

Black plate (22,1)

Buick Regal Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

6081497) - 2014 - CRC 2nd Edition - 11/27/13

2-22

Keys, Doors, and Windows

This feature prevents the rear
passenger windows from operating,
except from the driver position.

Press

Z

{

to activate the rear

window lockout switch. An indicator
light comes on when activated.

This switch also disables the door
locks on the rear doors. See

Safety

Locks on page 2-13

.

Press

Z

{

again to deactivate the

lockout switch.

If the indicator light flashes, the
feature may not be working properly.

Programming the Power
Windows

If the battery on the vehicle has
been recharged, disconnected, or is
not working, you will need to
reprogram each front power window
for the express-up feature to work.
Before reprogramming, replace or
recharge the vehicle's battery.

To program each front window:

1. The ignition is in ACC/

ACCESSORY or ON/RUN,
or Retained Accessory
Power (RAP).

2. Press and hold the power

window switch until the window
is fully open.

3. Pull the power window switch up

until the window is fully closed.

4. Continue holding the switch up

for approximately two seconds
after the window is completely
closed.

The window is now reprogrammed.
Repeat the process for the other
windows.

Sun Visors

Pull the sun visor down to block
glare. If equipped, detach the sun
visor from the center mount to pivot
to the side window or to extend
along the rod.

Detailed Information for 2014 Buick Regal Owner Manual

Lists of information found in 2014 Buick Regal Owner Manual - Page 52

  • 1. The ignition is in ACC/ ACCESSORY or ON/RUN, or Retained Accessory Power (RAP).
  • 2. Press and hold the power window switch until the window is fully open.
  • 3. Pull the power window switch up until the window is fully closed.
  • 4. Continue holding the switch up for approximately two seconds after the window is completely closed.