CRUISE CONTROL- Page 18

18

F

Optional equipment

CRUISE CONTROL

Setting Cruise Control

1. Press the   

On/Off 

button. The   Cruise Control symbol will illuminate in white on the 

instrument cluster.

2. When traveling at the desired speed, press down the SET– switch to set the speed. The 

 symbol will illuminate in green on the instrument cluster.

Adjusting Cruise Control

RES+ Resume/Accelerate

Press up to resume a set speed. When 

active, press up to increase speed. 

SET– Set/Coast

When active, press down to decrease 

speed.

Cancel

Press the 

button, or press the brake 

pedal, to cancel the Cruise Control without 

erasing the set speed from memory.
The set speed is erased when Cruise Control 

or the vehicle ignition is turned off. 

Adaptive Cruise Control

F

The system maintains the set speed and 

a  following gap — the time between your 

 vehicle and a vehicle detected directly ahead 

— by accelerating or braking automatically 

while you continue to steer.

  Press the 

Following Gap

 button to select a gap setting of Far, Medium or Near. 

This is also the Forward Collision Alert

F

 setting.

  Press and hold the 

Cancel

 button to switch between   regular Cruise Control and 

 Adaptive Cruise Control.

See Driving and Operating in your Owner’s Manual. 

  To apply the parking brake, pull the  

Parking Brake

 switch on the center 

 console.

  To release the parking brake, turn on the 

ignition, press the brake pedal, and then 

press the 

switch.

Note:

 The parking brake will release automatically 

if the vehicle is running, placed into gear and an 

attempt is made to drive. 

See Driving and Operating in your Owner’s Manual.

ELECTRIC PARKING BRAKE