CRUISE CONTROL- Page 18

18

F

Optional equipment

CRUISE CONTROL

Setting Cruise Control

1. Press the   

On/Off 

button. The   Cruise 

Control symbol will illuminate in white on the 

instrument cluster.

2. When traveling at the desired speed, press down 

the SET– switch to set the speed. The   symbol 

will illuminate in green on the instrument cluster.

Adjusting Cruise Control

RES+ Resume/Accelerate

Press up to resume a set speed. When active, press 

up to increase speed. 

SET– Set/Coast

When active, press down to decrease speed.

Cancel

Press the 

button, or press the brake pedal, to cancel the Cruise Control without erasing 

the set speed from memory. The set speed is erased when Cruise Control or the vehicle 

ignition is turned off. 

Adaptive Cruise Control

F

The system maintains the set speed and a  following gap — the time between your vehicle 

and a vehicle detected directly ahead — by accelerating or braking automatically while you 

continue to steer.

  Press the 

Following Gap

 button to select a gap setting of Far, Medium or Near. 

This is also the Forward Collision Alert

F

 setting.

  Press and hold the 

Cancel

 button to switch between   regular Cruise Control and 

 Adaptive Cruise Control.

See Driving and Operating in your Owner’s Manual. 

Driver Shift Control 

Driver Shift Control is a manual mode that allows 

the driver to shift gears manually. It can be used to 

drive the vehicle in a sportier manner, or to downshift 

when driving on a downhill grade to provide engine 

braking. 
1. From the Drive (D) position, move the shift lever 

left to the +/– position. 

2. Tap the shift lever forward (+) to upshift or rearward (–) to downshift. The current gear is 

shown on the Driver Information Center. 

If vehicle speed is too high or too low for the requested gear, the shift will not occur. When 

coming to a stop, the transmission will downshift automatically.

See Driving and Operating in your Owner’s Manual. 

AUTOMATIC TRANSMISSION