Seat Belt Inspection- Page 49

47

uu

Seat Belts

u

Seat Belt Inspection

Safe Driving

Seat Belt Inspection

Regularly check the condition of your seat belts as follows:

•

Pull each belt out fully, and look for frays, cuts, burns, and wear.

•

Check that the latch plates and buckles work smoothly and the belts retract 
easily.

u

If a belt does not retract easily, cleaning the belt may correct the problem. Only 
use a mild soap and warm water. Do not use bleach or cleaning solvents. Make 
sure the belt is completely dry before allowing it to retract.

Any belt that is not in good condition or working properly will not provide proper 
protection and should be replaced as soon as possible.
A belt that has been worn during a crash may not provide the same level of 
protection in a subsequent crash. Have your seat belts inspected by a dealer after 
any collision.

1

Seat Belt Inspection

3

WARNING

Not checking or maintaining seat belts can 
result in serious injury or death if the seat 
belts do not work properly when needed.

Check your seat belts regularly and have 
any problem corrected as soon as possible.

21 CIVIC 5D HUM-31TGG6400_01.book  47 ページ  ２０２０年８月２８日　金曜日　午後１時４８分