Detect Beep; Customized Features; There is no vehicle ahead- Page 524

uu

Honda Sensing

®

u

Adaptive Cruise Control (ACC)

*

522

Driving

■

There is no vehicle ahead

Your vehicle maintains the set speed without 
having to keep your foot on the brake or 
accelerator pedal.
If there previously was a vehicle detected 
ahead that kept your vehicle from traveling at 
the set speed, ACC accelerates your vehicle to 
the set speed, and then maintains it.

■

When you depress the accelerator pedal

You can temporarily increase the vehicle speed. In this case, there is no audible or 
visual alert even if a vehicle is in the ACC range.
ACC stays on unless you cancel it. Once you release the accelerator pedal, the 
system resumes the set speed.
There are times when the vehicle speed will decrease when the accelerator pedal is 
lightly applied.

1

When in Operation

Even if the interval between your vehicle and the 
vehicle detected ahead is short, ACC may start 
accelerating your vehicle under the following 
circumstances:

•

The vehicle ahead of you is going at almost the 
same speed as, or faster than, your vehicle.

•

A vehicle that cuts in front of you is going faster 
than your vehicle, gradually increasing the interval 
between the vehicles.

You can also set the system to beep when a vehicle in 
front of you comes in and goes out of the ACC 
detecting range. Change the 

ACC Forward Vehicle 

Detect Beep

 setting.

2

Customized Features

 P. 134, 350

Limitations

You may need to use the brake to maintain a safe 
interval when using ACC. Additionally, ACC may not 
work properly under certain conditions.

2

ACC Conditions and Limitations

 P. 523

A vehicle icon with dotted-line 
contour appears on the driver 
information interface

21 CIVIC 5D HUM-31TGG6400_01.book  522 ページ  ２０２０年８月２８日　金曜日　午後１時４８分