Pressure Gauge- Page 642

uu

If a Tire Goes Flat

u

Temporarily Repairing a Flat Tire

640

Han

d

lin
g the U

n

expected

7.

Press the inflator switch to turn on the kit.

u

The compressor starts injecting sealant 
and air into the tire.

u

When the sealant injection is complete 
continue to add air.

8.

After the air pressure reaches front: 35 psi 
(240 kPa)/rear: 33 psi (230 kPa), turn off 
the kit.

u

To check the pressure, occasionally turn 
off the compressor and read the gauge.

9.

Unplug the power plug from the accessory 
power socket.

10.

Unscrew the sealant/air hose from the tire 
valve stem. Reinstall the valve cap.

11.

Press the pressure relief button until the 
gauge returns 0 psi (0 kPa).

ON

OFF

Pressure Gauge

1

Injecting Sealant and Air

If the required air pressure is not reached within 10 
minutes, the tire may be too severely damaged for 
the kit to provide the necessary seal, and your vehicle 
will need to be towed.

See a Honda dealer for a replacement sealant bottle 
and proper disposal of an empty bottle.

Sealant/Air Hose

Valve Stem

21 CIVIC 5D HUM-31TGG6400_01.book  640 ページ  ２０２０年８月２８日　金曜日　午後１時４８分