What to Do After the Engine Starts; ENGINE START/STOP- Page 666

uu

If the Battery Is Dead

u

Jump Starting Procedure

664

Han

d

lin
g the U

n

expected

Once your vehicle's engine has started, remove the jumper cables in the following 
order.

1.

Disconnect the jumper cable from your vehicle's ground.

2.

Disconnect the other end of the jumper cable from the booster battery 

-

terminal.

3.

Disconnect the jumper cable from your vehicle's battery 

+

 terminal.

4.

Disconnect the other end of the jumper cable from the booster battery 

+

terminal.

Have your vehicle inspected by a nearby service station or a dealer.

*1: Models with the smart entry system have an 

ENGINE START/STOP

 button instead of an 

ignition switch.

■

What to Do After the Engine Starts

1

What to Do After the Engine Starts

The indicators for the Adaptive Cruise Control 
(ACC)

*

, Adaptive Cruise Control (ACC) with Low 

Speed Follow

*

, Road Departure Mitigation (RDM), 

Vehicle Stability Assist

TM

 (VSA

®

) System, Vehicle 

Stability Assist

TM

 (VSA

®

) OFF, low tire Pressure/TPMS

*

and Collision Mitigation Braking System

TM

 (CMBS

TM

) 

may come on when you turn the ignition switch to 
ON 

(

w

*1

 after reconnecting a battery.

Drive a short distance at more than 12 mph (20 
km/h). Each indicator should go off. If it does not, 
have your vehicle checked by a dealer.

* Not available on all models

21 CIVIC 5D HUM-31TGG6400_01.book  664 ページ  ２０２０年８月２８日　金曜日　午後１時４８分