Opening/Closing the Power Sliding Doors- Page 185

184

uu

Sliding Doors

u

Opening/Closing the Power Sliding Doors

*

Co
ntrols

Opening/Closing the Power Sliding Doors

*

The power sliding doors can be operated by pressing the power sliding door button 
on the keyless remote, pressing the power sliding door switches on the dashboard 
or door pillars, or using the door handle.

The power sliding doors can be operated when:

•

The sliding door main switch is in the 

ON

 position.

•

The power sliding door is unlocked.

•

The fuel fill door is closed (on the driver’s side sliding door only).

•

The power mode is in VEHICLE OFF or the remote engine start mode is active with 
use of the keyless remote.

•

The transmission is in 

(

P

, the brake pedal is depressed, or the parking brake is 

applied (with the power mode in ON) when using the power sliding door switches 
on the dashboard.

1

Opening/Closing the Power Sliding Doors

*

If the transmission is in a position other than 

(

P

, and 

release the brake pedal and the parking brake:
While opening – The sliding door stops and is left 
ajar.
While closing – The beeper sounds until the door 
closes.

Check that passengers, especially children, do not 
have their hands on the sliding doors or on the door 
pillars before its operation. If someone is caught in 
the opening or closing sliding door, it can cause 
serious injury.

Before replacing a rear tire, turn the power sliding 
door main switch to OFF.

Operate the power sliding doors only when the 
vehicle is at a complete stop. Make sure you apply the 
brake when rear passengers are boarding or exiting.

* Not available on all models

22 US ODYSSEY-31THR6400.book  184 ページ  ２０２０年１１月１６日　月曜日　午後１時４１分