Power Sliding Door Switches; Auto Reverse- Page 187

uu

Sliding Doors

u

Opening/Closing the Power Sliding Doors

*

186

Co
ntrols

The power sliding door opens when you press 
the 

OPEN

 side of the 

 / 

 switch, and 

closes when you press the 

CLOSE

 side of the 

 / 

 switch.

While the power sliding door is in operation, if 
you press the switch that corresponds to that 
power sliding door, the beeper sounds and 
the operation stops.

To resume the power sliding door operation, 
press the same switch again.

■

Power Sliding Door Switches

1

Opening/Closing the Power Sliding Doors

*

Auto Reverse

Do not touch the pinch sensor located at the front 
edge of the power sliding door. Do not damage the 
sensor. The power sliding door may not operate 
properly.

If the power sliding door senses resistance when 
closing automatically, it will stop closing and reverse 
direction. The beeper sounds.

Before the power sliding door operation, make sure 
there are no people or obstacles near the door. The 
auto reverse function should be activated in case of 
emergency only. If someone is caught in the opening 
or closing sliding door, it can cause serious injury. Pay 
special attention to children.

Closing a power sliding door on someone’s hand or 
fingers can cause serious injury. Some parts of the 
door edge do not sense resistance when the door is 
near closing.

Pinch 
Sensor

* Not available on all models

22 US ODYSSEY-31THR6400.book  186 ページ  ２０２０年１１月１６日　月曜日　午後１時４１分