When Driving; Instrument Cluster and Display- Page 132

4–16

When Driving

Instrument Cluster and Display

  Odometer

    The odometer records the total distance 
the vehicle has been driven.

  Trip  meter

    The trip meter can record the total distance 
of two trips. One is recorded in trip meter 
A, and the other is recorded in trip meter 
B.
  For instance, trip meter A can record the 
distance from the point of origin, and 
trip meter B can record the distance from 
where the fuel tank is fi lled.
  When trip meter A is selected, pressing 
the selector again within one second will 
change to trip meter B mode.
  When trip meter A is selected, TRIP A 
will be displayed. When trip meter B is 
selected, TRIP B will be displayed.
  The trip meter records the total distance 
the vehicle is driven until the meter is 
again reset. Return it to “0.0” by holding 
the selector depressed for 1 second 
or more. Use this meter to measure 
trip distances and to compute fuel 
consumption.

   NOTE

y

(Vehicles with type B audio)

  If the fuel economy data is reset using 

the fuel economy monitor, or trip A 
is reset using the trip meter when the 
function which synchronizes the fuel 
economy monitor and the trip meter is 
on, the fuel economy data and trip A are 
reset simultaneously.

  Refer to Fuel Economy Monitor on page 

 4-62 .

y

  Only the trip meters record tenths of 

kilometers (miles).

y

  The trip record will be erased when:

y

  The power supply is interrupted 

(blown fuse or the battery is 
disconnected).

y

  The vehicle is driven over 9999.9 km 

(mile).

  Trip  Computer

    The following information can be selected 
by pressing the selector with the ignition 
switched ON.

y

 Approximate distance you can travel on 

the available fuel

y

 Current fuel economy

  If you have any problems with your trip 
computer, consult an Authorized Mazda 
Dealer.

  Distance-to-empty  mode

    This  mode  displays  the  approximate 
distance you can travel on the remaining 
fuel based on the fuel economy.
  The distance-to-empty will be calculated 
and displayed every second.