When Driving; function when it is not in use:- Page 218

4–102

When Driving

i-ACTIVSENSE

  Switching to cruise control function

    When the ON switch is pressed 
continuously for about 2 seconds while 
the Mazda Radar Cruise Control (MRCC) 
system is turned on, the system is switched 
to the cruise control function.
  The Mazda Radar Cruise Control (MRCC) 
indicator light (green) in the instrument 
cluster turns off and the cruise control 
indication is displayed in the active 
driving display.

WARNING

  Always  turn  off  the cruise control 
function when it is not in use:

  Leaving the cruise control function 
turned on when it is not in use 
is dangerous as it could operate 
unexpectedly, resulting in an accident.

  How to set the speed

    Adjust the system to the desired vehicle 
speed using the accelerator pedal.
  Cruise control function begins when the 
 SET   or  SET   switch is pressed.

   NOTE

y

  The system may not be able to maintain 

the set speed constantly depending on 
driving conditions such as steep up or 
down slopes.

y

  The speed will continue increasing 

while the SET   switch is pressed and 
held. The speed will continue 
decreasing while the  SET   switch is 
pressed and held.

  How to increase the set speed

    The set speed can be increased using the 
following operations:

  To increase speed using the  SET 
switch

    Press  and  hold  the   SET   switch and 
release the switch at the desired speed.
  The set speed can be adjusted 
incrementally (1 km/h (1 mph) 
increments) by pressing the switch and 
releasing it immediately. For example, if 
the switch is pressed 4 times, the set speed 
increases by about 4 km/h (4 mph).

  To increase speed using accelerator 
pedal

    Depress the accelerator pedal and press the 
 SET   or  SET   switch at the desired 
speed.
  If the switch is not operated, the system 
returns to the set speed after you release 
your foot from the accelerator pedal.

  How to Decrease the Set Speed

    Press  the   SET   switch continuously and 
release the switch at the desired speed.
  The set speed can be adjusted 
incrementally (1 km/h (1 mph) increments) 
by pressing the switch and releasing it 
immediately. For example, if the switch 
is pressed 4 times, the set vehicle speed 
decreases by about 4 km/h (4 mph).