4–110
When Driving
i-ACTIVSENSE
NOTE
y
The Smart Brake Support (SBS) system operates when all of the following conditions are
met:
y
The ignition is switched ON.
y
The Smart Brake Support (SBS) system is on.
y
The vehicle speed is about 15 km/h or faster (10 mph or faster).
y
The relative speed between your vehicle and the vehicle ahead is about 15 km/h or
faster (10 mph or faster).
y
The Dynamic Stability Control (DSC) is not operating.
y
The Smart Brake Support (SBS) system may not operate under the following conditions:
y
If the vehicle is accelerated rapidly and it comes close to a vehicle ahead.
y
The vehicle is driven at the same speed as the vehicle ahead.
y
The accelerator pedal is depressed.
y
The brake pedal is depressed.
y
The steering wheel is being operated.
y
The selector lever is being operated.
y
The turn signal is being used.
y
When the vehicle ahead is not equipped with taillights or the taillights are turned off.
y
When warnings and messages, such as a dirty windshield, related to the Forward
Sensing Camera (FSC)/laser sensor (front) are being displayed in the center display.
y
Although the objects which activate the system are four-wheeled vehicles, the radar
sensor (front) could detect the following objects, determine them to be an obstruction, and
operate the Smart Brake Support (SBS) system.
y
Objects on the road at the entrance to a curve (including guardrails and snow banks).
y
A vehicle appears in the opposite lane while cornering or rounding a curve.
y
When crossing a narrow bridge.
y
When passing under a low gate or through a tunnel or narrow gate.
y
When entering an underground parking area.
y
Metal objects, bumps, or protruding objects on the road.
y
If you suddenly come close to a vehicle ahead.
y
When driving in areas where there is high grass or forage.
y
Two-wheeled vehicles such as motorbikes or bicycles.
y
Pedestrians or non-metallic objects such as standing trees.
y
When the system operates, the user is notifi ed by the fl ashing Smart Brake Support (SBS)
indicator light (red) and the active driving display.
y
The Smart Brake Support (SBS) warning light (amber) turns on when the system has a
malfunction. Refer to Warning/Indicator Lights on page 4-24 .