Interior Features; Audio System; Type B- Page 313

5–59

Interior Features

Audio System

Type B

USB port Auxiliary jack

  Connecting  a  device

     1.   If there is a cover on the AUX jack or 

USB port, remove the cover.

   2.   Connect the connector on the device to 

the USB port.

  Connecting with a connector cable

     1.   If there is a cover on the AUX jack or 

USB port, remove the cover.

   2.   Connect  the  device  plug/connector 

cable to the auxiliary jack/USB port.

WARNING

  Do not allow the connection plug cord 
to get tangled with the parking brake or 
the shift lever:

  Allowing the plug cord to become 
tangled with the parking brake or 
the shift lever is dangerous as it could 
interfere with driving, resulting in an 
accident.

CAUTION

  Do not place objects or apply force to 
the auxiliary jack/USB port with the 
plug connected.

   NOTE

y

  Insert the plug into the auxiliary jack/

USB port securely.

y

  Insert or pull out the plug with the plug 

perpendicular to the auxiliary jack/USB 
port hole.

y

  Insert or remove the plug by holding its 

base.

 How to use AUX mode (Type A)

     1.   Switch  the  ignition  to  ACC  or  ON.
   2.   Press the power/volume dial to turn the 

audio system on.

   3.   Press  the  media  button  (

) of the 

audio unit to change to the AUX mode.

   NOTE

y

  When the device is not connected to the 

auxiliary jack, the mode does not switch 
to the AUX mode.

y

  Adjust the audio volume using the 

portable audio device or audio unit.

y

  Audio adjustments other than audio 

volume can only be done using the 
portable audio device.

y

  If the connection plug is pulled out from 

the auxiliary jack while in AUX mode, 
noise may occur.