Interior Features; does not have a four-digit PIN code- Page 336

5–82

Interior Features

Bluetooth

®

   NOTE

y

  Some Bluetooth 

®

  audio devices need a 

certain amount of time before the 
symbol is displayed.

y

  If the pairing failed, “ Err ” fl ashes for 

three seconds .

y

  Pairing cannot be performed while 

the vehicle is moving. If you attempt 
to perform pairing while the vehicle is 
moving, “ PAIR DISABLE ” is displayed 
.

y

  If seven Bluetooth 

®

  audio devices have 

already been paired to the vehicle, 
pairing cannot be performed and 
“ MEMORY FULL ” is displayed. Delete 
one paired device to pair another one.

    Pairing  a  Bluetooth 

®

  audio device which 

does not have a four-digit PIN code

     1.   Using  the  audio  control  dial,  select 

the pairing mode “ PAIR DEVICE ” 
in the “ BT SETUP ” mode. (Refer to 
“Bluetooth

®

  audio set up” for details.)

   2.   Press the audio control dial to 

determine the mode. After “ ENTER 
PIN ” is displayed on the audio display 
for three seconds, “ PIN 0000 ” is 
displayed and the PIN code can be 
input.

   3.   Press the audio control dial while “ PIN 

0000 ” is displayed. “ PAIRING ” fl ashes 
on the audio display.

   4.   Operate  the  Bluetooth 

®

  audio device 

and set it to the pairing mode while 
“ PAIRING ”  is  fl ashing.

   5.   As  the  Bluetooth 

®

  audio device 

requires a PIN code, input “0000”.

   6.   When  the  pairing  is  completed,   and 

“ PAIR SUCCESS ” are displayed after 
about 10-30 seconds, after which 
“ PAIR SUCCESS ” continues to be 
displayed for three seconds, and then 
the unit returns to the normal display.

   NOTE

y

  If pairing cannot be completed, try 

“1234” instead. Refer to the owner's 
manual of your mobile device for the 
right PIN code.

y

  Some Bluetooth 

®

  audio devices need a 

certain amount of time before the 
symbol is displayed.

y

  If the pairing failed, “ Err ” fl ashes for 

three seconds.

y

  Pairing cannot be performed while 

the vehicle is moving. If you attempt 
to perform pairing while the vehicle is 
moving, “ PAIR DISABLE ” is displayed 
.

y

  If seven Bluetooth 

®

  audio devices have 

already been paired to the vehicle, 
pairing cannot be performed and 
“ MEMORY FULL ” is displayed. Delete 
one paired device to pair another one.

    Device  selection

    If several devices have been paired, the 
Bluetooth

®

  unit links the device last 

paired. If you would like to link a different 
paired device, it is necessary to change the 
link. The order of device priority after the 
link has been changed is maintained even 
when the ignition is switched off.

   1.   Using the audio control dial, select the 

link change mode “ LINK CHANGE ” 
in the “ BT SETUP ” mode. (Refer to 
“Bluetooth

®

  audio device set-up” for 

details.)

   2.   Press the audio control dial to 

determine the mode.

   3.   The name of the currently linked 

Bluetooth

®

  audio device is displayed.

If  no  Bluetooth 

®

  audio device is 

currently linked, the name of the fi rst 
device among the paired devices is 
displayed.