How to use AUX mode; Interior Features; Auto memory tuning- Page 306

2021 Mazda CX-3 Cx 3 Owners Manual

Table of Contents

When Driving
Interior Features
Customer Information and Reporting Safety Defects
background image

3. Repeat this operation for the other

stations and bands you want to store.
To tune one in the memory, select AM,
FM1, or FM2 and then press its
channel preset button. The station
frequency or the channel number will
be displayed.

Auto memory tuning

This is especially useful when driving in
an area where the local stations are not
known.
 
Press and hold the auto memory button
(

) for about 2 seconds until a beep

is heard; the system will automatically
scan and temporarily store up to 6 stations
with the strongest frequencies in each
selected band in that area.
 
After scanning is completed, the station
with the strongest frequency will be tuned
and its frequency displayed. Press and
release the auto memory button (

)

to recall stations from the auto-stored
stations. One stored station will be
selected each time and its frequency and
channel number will be displayed.

NOTE

If no stations can be tuned after scanning
operations, “A” will be displayed.

How to use AUX mode

1. Switch the ignition to ACC or ON.
2. Press the power/volume dial to turn the

audio system on.

3. Press the media button (

) of the

audio unit to change to the AUX mode.

NOTE

When the device is not connected to the
auxiliary jack, the mode does not switch
to the AUX mode.

Adjust the audio volume using the
portable audio device or audio unit.

Audio adjustments other than audio
volume can only be done using the
portable audio device.

If the connection plug is pulled out from
the auxiliary jack while in AUX mode,
noise may occur.

Interior Features

Audio Set [Type A (non-touchscreen)]

5-24

CX-3_8JL1-EA-20G_Edition1_old

2020-5-22 15:31:00

Detailed Information for 2021 Mazda CX-3 Cx 3 Owners Manual

Lists of information found in 2021 Mazda CX-3 Cx 3 Owners Manual - Page 306

  • 3. Repeat this operation for the other stations and bands you want to store.
  • 1. Switch the ignition to ACC or ON.
  • 2. Press the power/volume dial to turn the audio system on.
  • 3. Press the media button ( ) of the audio unit to change to the AUX mode.