NOTE: ; IMPORTANT: ; PORTABLE AUDIO PLAYER INTEGRATION - Page 35

2016 Mazda CX-5 Cx 5 Smart Start Guide

Model Year
2014 Dodge Charger SRT Owner Manual
background image

33

NOTE: 

You will need an audio cable with an 1/8 inch (3.5 mm)  

mini stereo plug (available as a Genuine Mazda accessory) to  

connect your portable audio player into the AUX jack. 

IMPORTANT: 

•  Set the volume level on your portable audio player to the highest level before 

distortion starts, then use the vehicle’s audio system to adjust the volume.

•  Unplug any device from the USB port and accessory socket before turning off 

the vehicle. Leaving devices plugged in can drain the battery and cause issues 

during the Bluetooth pairing process at start-up. Wait about 15 seconds after 

starting the vehicle before plugging anything into the USB port.

1

  Locate the USB port or AUX jack.

2

  Connect the device plug into the portable audio player and into the  

USB port or AUX jack.

3

  Turn the vehicle audio system on.

4

  •  Audio Controls (without Mazda Connect)

: Push the MEDIA   

button on the audio unit to switch to the AUX or USB mode.

 

•  Audio Controls (with Mazda Connect)

: Select AUX or USB from 

the Sources menu.

5

  •  USB Port

: Use the vehicle’s audio system or steering wheel controls   

to control the connected USB device.

 

•  AUX Jack:

 Use the portable audio player controls to play music.

Refer to the Owner’s Manual for additional information.

PORTABLE AUDIO PLAYER INTEGRATION  

USING THE USB PORT OR AUX JACK

Your vehicle is equipped with a USB port and 

auxiliary AUX jack, located below the climate control 

system, that allows you to play your iPod, USB 

device, or portable audio player through the vehicle’s 

audio system. Learn the system when parked and 

do not let it distract you while driving.

12 VOLT ACCESSORY SOCKETS

The accessory socket located below the climate control system (if equipped) 

only has power when the ignition is in ON or ACC. The accessory sockets 

located in the center console and in the rear cabin have power, regardless of 

the ignition position.

Audio USB and AUX Inputs

NOTE: 

When using a USB memory stick, the system plays the first audio file when 

restarting the vehicle. It does not start where it left off when turning off the engine.

NOTE: 

When using the accessory socket in the center console or rear cabin, make 

sure to disconnect any device from it when turning off the ignition; otherwise, the 

vehicle’s battery could go dead.

USB

AUX

Detailed Information for 2016 Mazda CX-5 Cx 5 Smart Start Guide

Lists of information found in 2016 Mazda CX-5 Cx 5 Smart Start Guide - Page 35

  • 3.5 mm) mini stereo plug (available as a Genuine Mazda accessory) to connect your portable audio player into the AUX jack.
  • Set the volume level on your portable audio player to the highest level before distortion starts, then use the vehicle’s audio system to adjust the volume.
  • Unplug any device from the USB port and accessory socket before turning off the vehicle.
  • Audio Controls (without Mazda Connect) : Push the MEDIA button on the audio unit to switch to the AUX or USB mode.
  • Audio Controls (with Mazda Connect) : Select AUX or USB from the Sources menu.
  • USB Port : Use the vehicle’s audio system or steering wheel controls to control the connected USB device.
  • AUX Jack: Use the portable audio player controls to play music.

Related Documents for 2016 Mazda CX-5 Cx 5 Smart Start Guide