Before Driving; Operation using the transmitter; Operation using each switch- Page 113

NOTE



Do not apply unnecessary force to the
power liftgate when it is opening/closing
electrically. Unnecessary force on the
liftgate may cause it to reverse direction
of movement automatically. Also, it
could result in a malfunction.



The power liftgate may not open/close
electrically if the vehicle is parked on an
incline, or there is strong wind, or the
liftgate is laden with snow.



If a power liftgate system fuse has
blown, the liftgate cannot be opened
using the power liftgate switch or the
electric liftgate opener. Use the
emergency lever to open the liftgate.



Fully close the power liftgate before
disconnecting the vehicle battery. If the
battery is disconnected with the liftgate
open, it cannot be opened or closed
automatically after the battery is
reconnected. If this happens, fully close
the liftgate manually to restore the auto
full open/close function.



If the liftgate is snow-laden, remove the
snow before operating the power
liftgate. Operating the power liftgate
with excessive force applied to the
liftgate may damage the liftgate.

Operation using the transmitter

Press the power liftgate button for one
second or longer. The hazard warning
lights flash twice and the liftgate opens/
closes after the beep sounds.
Refer to Transmitter on page 3-5.

NOTE



When the ignition is switched ON, the
transmitter does not operate.



When opening the liftgate by pressing
the power liftgate button on the
transmitter, the liftgate can be opened
even when it is locked.



If the power liftgate button on the
transmitter is pressed while the liftgate
is opening/closing electrically, the beep
is activated and the liftgate stops. When
pressing the power liftgate button again,
the liftgate moves in the reverse
direction.

Operation using each switch

Operation conditions

Opening the liftgate

If the vehicle has satisfied all the
following operation conditions, the power
liftgate can be opened using the power
function.



All doors and the liftgate are unlocked.



The ignition is switched OFF, or the
selector lever is in P with the ignition
switched ON.

Closing the liftgate



The ignition is switched OFF, or the
selector lever is in P with the ignition
switched ON.

NOTE



If the vehicle moves with the selector
lever shifted to a position other than P
while the liftgate is opening/closing
electrically, the liftgate moves as
follows:

While opening electrically

Before Driving

Doors and Locks

3-23

CX-5_8JM9-EA-20G_Edition1_old

2020-6-2 16:33:11