Before Driving; Power liftgate button; Power saving function- Page 97

After unlocking with the key, all doors
and the liftgate will automatically lock if
any of the following operations are not
performed within about 60 seconds. If
your vehicle has a theft-deterrent
system, the hazard warning lights will
flash for confirmation.
The time required for the doors to lock
automatically can be changed.
Refer to the Settings section in the
Mazda Connect Owner's Manual.



A door or the liftgate is opened.



The ignition is switched to any
position other than off.



(With theft-deterrent system)

When the doors are unlocked by
pressing the unlock button on the key
while the theft-deterrent system is turned
off, the hazard warning lights will flash
twice to indicate that the system is
turned off.

Power liftgate button

*

To open/close the liftgate, press the power
liftgate button for one second or longer
with the liftgate in the fully closed/open
position.
The hazard warning lights flash twice and
the liftgate opens/closes after the beep
sounds.

Panic button

If you witness from a distance someone
attempting to break into or damage your
vehicle, press and hold the panic button to

activate the vehicle's alarm. Call
emergency services if necessary.

NOTE

The panic button will work whether any
door or the liftgate is open or closed.

(Turning on the alarm)

Pressing the panic button for 1 second or
longer will trigger the alarm for about 2
minutes and 30 seconds, and the following
will occur:



The horn sounds intermittently.



The hazard warning lights flash.

(Turning off the alarm)

The alarm stops by pressing any button on
the key.

Power saving function

By turning on the transmitter power saving
function, the advanced keyless entry

*1

 and

push button start system functions turn off
and the battery power consumption of the
transmitter is restricted.
The remote control function is operational
by operating the transmitter switch even
while the power saving function is turned
on. However, the operation indicator light
of the transmitter does not turn on/flash.

Turning on the power saving function

After you have turned on the power saving
function according to the following
procedure, the hazard warning lights and
sound operate

*1

 one time.

Before Driving

Keys

*Some models.

3-7

CX-5_8JM9-EA-20G_Edition1_old

2020-6-2 16:33:11