Before Driving; Locking, Unlocking with Door-Lock; Operation from inside- Page 120

Function

number

Function

*1

5

When the ignition is switched ON
and the selector lever is shifted from
park (P) to any other gear position, all
the doors and the liftgate lock auto‐
matically.
When the selector lever is shifted to
park (P) while the ignition is switched
ON, all the doors and the liftgate un‐
lock automatically.

6

All the doors and the liftgate lock au‐
tomatically when the vehicle speed is
about 20 km/h (12 mph) or more.
When the selector lever is shifted to
park (P) while the ignition is switched
ON, all the doors and the liftgate un‐
lock automatically.

*

1 Other settings for the auto door lock function are

available at an Authorized Mazda Dealer. For
details consult an Authorized Mazda Dealer.
Refer to the Settings section in the Mazda
Connect Owner's Manual.

Settings can be changed using the
following procedure.
1. Safely park the vehicle. All doors and

the liftgate must remain closed.

2. Switch the ignition ON.
3. Press and hold the lock side of the

driver's door-lock switch within 20
seconds of switching the ignition ON,
and make sure a beep sound is heard
about eight seconds afterwards.

4. Refer to the auto lock/unlock function

setting table, determine the function
number for the desired setting. Press
the unlock side of the driver's
door-lock switch the same number of
times as the selected function number
(Ex. If you select function 2, press the
unlock side of the switch only 2 times).

5. Three seconds after the function

setting has been changed, a beep sound
will beep in the amount of the selected

function number. (Ex. Function
number 3 = 3 beep sounds)

P

ress 

u

nlock side of 

lock switch once

P

ress 2 times

P

ress 3 times

C

u

rrent F

u

nction N

u

mber

F

u

nction N

u

mber 1

F

u

nction N

u

mber 2

P

ress 4 times

F

u

nction N

u

mber 3

P

ress 5 times

F

u

nction N

u

mber 4

P

ress 7 times

F

u

nction N

u

mber 5

P

ress 6 times

F

u

nction N

u

mber 6

Cancel settin

g

Cancel settin

g

F

u

nction set (The 

n

u

mber of beeps 

heard is the same as 
the selected f

u

nction 

n

u

mber) 

P

ress lock side of  

lock switch

Wait for 3 second

NOTE



The doors and the liftgate cannot be
locked or unlocked while the setting
function is being performed.



The procedure can be cancelled by
pressing the lock side of the driver's
door-lock switch.

▼

Locking, Unlocking with Door-Lock
Knob

Operation from inside

To lock any door from the inside, press the
door-lock knob.
To unlock, pull it outward.

Before Driving

Doors and Locks

3-18

CX-9_8JK1-EA-20G_Edition2_old

2020-7-20 17:31:45