Before Driving; Changing the power liftgate fully open; When changing the position- Page 129

Changing the power liftgate fully open
position

The power liftgate fully-open position can
be changed according to the height of a
garage.

When changing the position

1. Stop the liftgate at the desired position.
2. Press the power liftgate close switch

for about three seconds.
A beep sound is activated two times to
indicate that the position change has
been completed.

NOTE

Set the desired fully-open position of the
liftgate at the position where it is open
more than halfway. The position where it
is less than halfway open cannot be set.

To reset

1. Open the liftgate.
2. Press the power liftgate close switch

for about seven seconds.
A beep sound is activated three times
to indicated that the reset has been
completed.

NOTE

After about 3 seconds have elapsed since
the switch was pressed, a beep sound is
activated 2 times to indicate that the
liftgate fully-open position has changed.
Continuously press the switch for about 7
seconds to complete the reset.

Jam-safe equipment

While the power liftgate is opening/
closing electrically and the system detects
a person or an object in the liftgate's path,
the liftgate will move in the reverse
direction automatically and stops.

WARNING

Always check the area around the power
liftgate before opening/closing it:

Not checking for occupants and objects
around the power liftgate before opening/
closing it is dangerous. The jam-safe
equipment is designed to prevent jamming
in the event an obstruction is in the
liftgate's path. The system may not detect
certain objects obstructing the liftgate
depending on the way they are positioned
and their shape. However, if the jam-safe
function detects an obstruction and moves
the liftgate in the reverse direction, an
occupant in the liftgate's path could be
seriously injured.

CAUTION

Sensors are installed on both ends of the
power liftgate. Be careful not to allow the
sensors to be scratched or damaged by
sharp objects, otherwise the liftgate may
no longer open/close automatically. In
addition, if the sensor is damaged while the
liftgate is closing automatically, the system
will stop.

Sensor

Before Driving

Doors and Locks

3-27

CX-9_8JK1-EA-20G_Edition2_old

2020-7-20 17:31:45