When Driving; Garage Door Two-Way; Programming two-way communication- Page 259



Verify that the programming has been
erased if you resell the vehicle.

1. Press the two outer HomeLink buttons

continuously at the same time until the
indicator light flashes.

HomeLink button 1

HomeLink button 3

2. Stop pressing the HomeLink buttons.

▼

Garage Door Two-Way
Communication

The garage door two-way communication
is a function that communicates with the
garage door opener and indicates whether
the garages door is open or closed using
the indicator lights in the rear view mirror.
It can indicate the status of the garage door
within a range up-to 250 m (820 ft).

NOTE

The communication range may shorten
depending on obstructions.

Programming two-way communication

Within five seconds after programming a
new HomeLink button, both of the garage
door status indicator lights will flash
rapidly in green indicating that the garage
door two-way communication has been
established. If the garage door status
indicator lights flash, the two-way
communication programming is complete.
 
If the garage door status indicator lights do
not flash, the two-way communication
programming is not completed. For

additional HomeLink information and
programming videos, refer to the
following Websites:



www.HomeLink.com



www.youtube.com/HomeLinkGentex

Operating the garage door two-way
communication

By pressing HomeLink buttons 1 and 2 at
the same time for two seconds, the status
of the garage door is indicated for about 3
seconds as follows:

HomeLink button 1

HomeLink button 2

Garage door

status

Indicator light

Closing

Amber flashes

Opening

Amber flashes

Closed

Green turns on

Opened

Green turns on

NOTE

The programming will not be erased even
if the battery is disconnected.

When Driving

Switches and Controls

4-91

CX-9_8JK1-EA-20G_Edition2_old

2020-7-20 17:31:45