Essential Safety Equipment; Entering/exiting the third-row seat area- Page 30

CAUTION



When operating the seat, be careful not
to get your hand or foot caught, or hit
your head.



Before moving the second-row seat,
make sure that the head restraint is at
the lowest position. If the second-row
seat is folded forward while the head
restraint is pulled up, there will not be
enough space for getting in or out of the
vehicle which could cause an occupant
to trip and fall resulting in injury.



Check the position of a front seat before
folding a second-row seatback.
Depending on the position of a front
seat, it may not be possible to fold a
second-row seatback all the way down
because it may hit the seatback of the
front seat which could scratch or
damage the front seat or its pocket.
Remove the head restraint on the
second-row outboard seat if necessary.

Entering/exiting the third-row seat area

1. Lower the head restraint all the way

down.
Refer to Head Restraints on page
2-28.

2.

(Lever)

Pull up the lever on the side of the
head restraint to unlock the seat, fold

the seatback forward, and slide the seat
forward.

(Switch)

To unlock the seat, press the switch
continuously until a sound is activated,
release it, fold the seatback forward,
and slide the seat forward.

NOTE

When any of the following conditions
is met, a beep sound is activated
continuously and the switch operation
is canceled.



The door on the side where the
switch was operated is closed.



The switch is pressed continuously
for 5 s or more.



The vehicle is being driven.



The selector lever is in a position
other than P, and the parking brake
is off.



The battery has deteriorated.

Essential Safety Equipment

Seats

2-18

CX-9_8JK1-EA-20G_Edition2_old

2020-7-20 17:31:45