Canceling Driver Attention Alert; When Driving; Driver Attention Alert (DAA)- Page 306



The vehicle speed is about 65 to 140 km/h (40 to 86 mph).



The system detects white (yellow) lane lines.



The system has completed learning of the driver’s driving data.



The DAA does not operate under the following conditions.



The vehicle speed is less than about 65 km/h (40 mph).



The vehicle speed exceeds about 140 km/h (86 mph)



The vehicle is making a sharp turn.



The vehicle is changing lanes.



The system cannot detect white (yellow) lane lines.



The DAA may not operate normally under the following conditions.



White (yellow) lane lines are less visible because of dirt or fading/patchiness.



The vehicle is jolted or swayed continuously by strong winds or rough roads.



The vehicle is driven aggressively.



When making frequent lane changes.



The DAA detects driver fatigue and decreased attentiveness based on the driving data
when the vehicle is driven at about 65 to 140 km/h (40 to 86 mph) for about 20 minutes.
The driving data will be reset under the following conditions.



The vehicle is stopped for 15 minutes or longer.



The vehicle is driven at less than about 65 km/h (40 mph) for about 30 minutes.



The ignition is switched off.



After the DAA has displayed the first message encouraging rest, it does not display the
next one until 45 minutes have passed.

▼

Driver Attention Alert (DAA)
Display (White)

When the system detects driver fatigue or
decreased attentiveness, it activates the
warning sound and displays an alert in the
multi-information display.

▼

Canceling Driver Attention Alert
(DAA)

The DAA can be set to not activate.

Refer to the Settings section in the Mazda
Connect Owner's Manual.

When Driving

i-ACTIVSENSE

4-138

CX-9_8JK1-EA-20G_Edition2_old

2020-7-20 17:31:45