Adjustable-type Bench Seat Type); Foldable Head Restraints; Essential Safety Equipment- Page 41

Second-row center seat (6:4 Split
Adjustable-type Bench Seat Type)

▼

Removal/Installation (Front
outboard seat/Second-row seat)

To remove the head restraint, pull it up
while pressing the stop-catch.
To install the head restraint, insert the legs
into the holes while pressing the
stop-catch.

WARNING

Always drive with the head restraints
installed when seats are being used and
make sure they are properly installed:

Driving with the head restraints not
installed is dangerous. With no support
behind your head, your neck could be
seriously injured in a collision.

After installing a head restraint, try lifting it
to make sure that it does not pull out:

Driving with an unsecured head restraint is
dangerous as the effectiveness of the head
restraint will be compromised which could
cause it to unexpectedly detach from the
seat.

CAUTION



When installing a head restraint, make
sure that it is installed correctly with the
front of the head restraint facing
forward. If the head restraint is installed
incorrectly, it could detach from the seat
during a collision and result in injury.



The head restraints on each of the front
and second-row seats are specialized to
each seat. Do not switch around the
head restraint positions. If a head
restraint is not installed to its correct seat
position, the effectiveness of the head
restraint during a collision will be
compromised which could cause injury.

▼

Foldable Head Restraints
(Third-row Seat)

The third-row seats are equipped with
foldable head restraints.

NOTE

The foldable head restraints cannot be
adjusted or removed.

(With strap)

To fold the head restraint, pull the strap
and fold the head restraint downward.

Essential Safety Equipment

Seats

2-29

CX-9_8JK1-EA-20G_Edition2_old

2020-7-20 17:31:45