Obstruction Detection Indication; When Driving; Without front ultrasonic sensor and front corner ultrasonic sensor- Page 445



The parking sensor switch is pressed while the parking sensor is in operation.



The vehicle speed is 10 km/h (6 mph) or more. (Except rear sensor)

Without front ultrasonic sensor and front corner ultrasonic sensor

When the ignition is switched ON and the selector lever is shifted to the reverse (R), the
beep sound activates and the system is enabled for use.
The sensors detect obstructions under the following conditions:

Sensor

Condition

Rear Ultrasonic Sensor

The selector lever is in reverse (R).

Rear Corner Ultrasonic
Sensor

The selector lever is in reverse (R), and the vehicle speed is about 10 km/h (6 mph)
or less.

▼

Obstruction Detection Indication

The position of a sensor which has detected an obstruction is indicated. The gauge
illuminates in different areas depending on the distance to an obstruction detected by the
sensor.
As the vehicle approaches closer to an obstruction, the zone in the gauge closer to the
vehicle illuminates.
 

With 360° view monitor

Without 360° view monitor

Left front corner 
ultrasonic 
sensor

Right front 
corner ultrasonic 
sensor

Rear ultrasonic 
sensor

Rear ultrasonic 
sensor

Left rear corner 
ultrasonic 
sensor

Left front corner 
ultrasonic 
sensor

Left rear corner 
ultrasonic 
sensor

Right rear 
corner ultrasonic 
sensor

Right front 
corner ultrasonic 
sensor

Right rear 
corner ultrasonic 
sensor

Front ultrasonic 
sensor

Front ultrasonic 
sensor

Some models

NOTE

The detection indicator can switch between display and non-display.
Refer to the Settings section in the Mazda Connect Owner's Manual.

(Vehicles with 360° View Monitor)

When Driving

Parking Sensor System (Mazda Connect (Type A))

4-277

CX-9_8JK1-EA-20G_Edition2_old

2020-7-20 17:31:45