Obstruction Detection Indication; When Driving; Without 360°view monitor- Page 455

▼

Obstruction Detection Indication

The position of a sensor which has detected an obstruction is indicated. The gauge
illuminates in different areas depending on the distance to an obstruction detected by the
sensor.
As the vehicle approaches closer to an obstruction, the zone in the gauge closer to the
vehicle illuminates.

Without 360°view monitor

Left front corner 
ultrasonic sensor gauge

Right front corner 
ultrasonic sensor gauge

Rear ultrasonic sensor gauge

Left rear corner 
ultrasonic sensor gauge

Right rear corner 
ultrasonic sensor gauge

Front sensor ultrasonic gauge

With 360°view monitor

Rear sensor ultrasonic gauge

Left front corner 
ultrasonic sensor gauge

Left rear corner 
ultrasonic sensor gauge

Right front corner 
ultrasonic sensor gauge

Right rear corner 
ultrasonic sensor gauge

Front ultrasonic sensor gauge

NOTE

The detection indicator can be switched between display and non-display and the buzzer
volume can be changed.
Refer to the Settings section in the Mazda Connect Owner's Manual.

(Vehicles with 360° View Monitor)

When the detection indicator is set to “Display”, even with the 360° view monitor not
displayed, if a front ultrasonic sensor or a front corner ultrasonic sensor detects an
obstruction, the 360° view monitor switches automatically to display. When an obstruction
is no longer detected, the display switches to the display before the obstruction was
detected. However, while the 360° view monitor is displayed, it continues to display no
matter if an obstruction is detected or not.

When Driving

Parking Sensor System (Mazda Connect (Type B))

4-287

CX-9_8JK1-EA-20G_Edition2_old

2020-7-20 17:31:45