Appearance Care- Page 299

2005 Mazda MAZDA3 4-Door Mazda3 Owners Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

background image

Black plate (299,1)

CAUTION

l

Don't use steel wool, abrasive
cleaners, or strong detergents
containing highly alkaline or caustic
agents on chrome-plated or anodized
aluminum parts. This may damage
the protective coating; also, cleaners
and detergents may discolor or
deteriorate the paint.

l

To prevent damaging the antenna,
remove it before entering a car wash
facility or passing beneath a low
overhead clearance.

Pay special attention to removing salt,
dirt, mud, and other foreign material from
the underside of the fenders, and make
sure the drain holes in the lower edges of
the doors and rocker panels are clean.

Insects, tar, tree sap, bird droppings,
industrial fallout, and similar deposits can
damage the finish if not removed
immediately. When prompt washing with
plain water is ineffective, use a mild soap
made for use on vehicles.

Thoroughly rinse off all soap with
lukewarm or cold water. Don't allow soap
to dry on the finish.

After washing the vehicle, dry it with a
clean chamois to prevent water spots from
forming.

WARNING

Driving with Wet Brakes:
Driving with wet brakes is dangerous.
Increased stopping distance or the
vehicle pulling to one side when
braking could result in a serious
accident. Light braking will indicate
whether the brakes have been affected.
Dry the brakes by driving very slowly
and applying the brakes lightly until
brake performance is normal.

Waxing

Your vehicle needs to be waxed when
water no longer beads on the finish.
Always wash and dry the vehicle before
waxing it. In addition to the vehicle body,
wax the metal trim to maintain its luster.

1. Use wax which contains no abrasives.

Waxes containing abrasive will remove
paint and could damage bright metal
parts.

2. Use a good grade of natural wax for

metallic, mica, and solid colors.

3. When waxing, coat evenly with the

sponge supplied or a soft cloth.

4. Wipe off the wax with a soft cloth.

NOTE

A spot remover to remove oil, tar, and
similar materials will usually also take
off the wax. Rewax these areas even if
the rest of the vehicle doesn't need it.

Maintenance and Care

Appearance Care

8-57

Mazda3_8T96-EA-04J_Edition3 Page299
Wednesday, May 11 2005 3:39 PM

Form No.8T96-EA-04J

Detailed Information for 2005 Mazda MAZDA3 4-Door Mazda3 Owners Manual

Lists of information found in 2005 Mazda MAZDA3 4-Door Mazda3 Owners Manual - Page 299

  • 1. Use wax which contains no abrasives.
  • 2. Use a good grade of natural wax for metallic, mica, and solid colors.
  • 3. When waxing, coat evenly with the sponge supplied or a soft cloth.
  • 4. Wipe off the wax with a soft cloth.

Related Documents for 2005 Mazda MAZDA3 4-Door Mazda3 Owners Manual