Owner Maintenance- Page 46

2012 Mazda MAZDA3 4-Door Mazda3 Maintenance Schedule

Model Year
2014 Dodge Charger SRT Owner Manual
background image

Black plate (428,1)

2. Disconnect the electrical connector

from the bulb by pressing the tab on
the connector with your finger and
pulling the connector downward.

3. Turn the socket and bulb assembly to

remove it. Carefully remove the bulb
from its socket in the reflector by
gently pulling it straight backward out
of the socket.

4. Install the new bulb in the reverse order

of the removal procedure.

(Type B)

1. Make sure the ignition is switched off

and the headlight switch is off.

2. Turn the socket and bulb assembly

counterclockwise and remove it.

3. Disconnect the bulb from the socket.

4. Install the new bulb in the reverse order

of the removal procedure.

Front turn signal lights/Front side-
marker lights/Parking lights (Canada)

1. Make sure the ignition is switched off

and the headlight switch is off.

2. If you are changing the right bulb, start

the engine, turn the steering wheel all
the way to the left, and turn off engine.
If you are changing the left bulb, turn
the steering wheel to the right.

3. Turn the center section of the plastic

retainer counterclockwise and remove
the retainers and partially peel back the
mudguard.

Installation

Removal

8-46

Maintenance and Care

Owner Maintenance

Mazda3_8BY6-EA-11F_Edition1 Page428
Wednesday, June 15 2011 2:2 PM

Form No.8BY6-EA-11F

Detailed Information for 2012 Mazda MAZDA3 4-Door Mazda3 Maintenance Schedule

Lists of information found in 2012 Mazda MAZDA3 4-Door Mazda3 Maintenance Schedule - Page 46

  • 2. Disconnect the electrical connector from the bulb by pressing the tab on the connector with your finger and pulling the connector downward.
  • 3. Turn the socket and bulb assembly to remove it.
  • 4. Install the new bulb in the reverse order of the removal procedure.
  • 1. Make sure the ignition is switched off and the headlight switch is off.
  • 2. Turn the socket and bulb assembly counterclockwise and remove it.
  • 3. Disconnect the bulb from the socket.
  • 4. Install the new bulb in the reverse order of the removal procedure.
  • 1. Make sure the ignition is switched off and the headlight switch is off.
  • 2. If you are changing the right bulb, start the engine, turn the steering wheel all the way to the left, and turn off engine.
  • 3. Turn the center section of the plastic retainer counterclockwise and remove the retainers and partially peel back the mudguard.

Related Documents for 2012 Mazda MAZDA3 4-Door Mazda3 Maintenance Schedule