Owner Maintenance; High-beam bulbs/Daytime running; Maintenance and Care- Page 472

4. Turn the screw counterclockwise and

remove it, and then partially peel back
the mudguard.
 

5. Disconnect the connector from the unit

by pressing the tab on the connector
with your finger and pulling the
connector downward.
 

6. Turn the socket and bulb assembly to

remove it. Carefully remove the bulb
from its socket in the reflector by
gently pulling it straight backward out
of the socket.
 

7. Install the new bulb in the reverse

order of the removal procedure.

High-beam bulbs/Daytime running
lights

1. Make sure the ignition is switched off,

and the headlight switch is off.

2. Lift the hood.
3. Disconnect the connector from the unit

by pressing the tab on the connector
with your finger and pulling the
connector downward.
 

Maintenance and Care

Owner Maintenance

6-44

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21