m{zd{
3
5
STARTING THE ENGINE
STARTING THE ENGINE
WITH ACCELERATED WARM-UP SYSTEM (AWS)
The Mazda3 is equipped with SKYACTIV combustion technology. This technology
includes AWS (Accelerated Warm-up System) for optimal emission performance during
cold-start conditions.
While Carrying the Advanced Key…
• START THE ENGINE by pushing the START/
STOP ENGINE button while pushing the clutch
pedal (M/T) or the brake pedal (A/T).
• WHAT WILL YOU NOTICE? On start-up, the engine speed
and sound are elevated (1500 RPM) for less than one
minute to quickly bring the catalyst to efficient operating
temperature. The RPM will reduce to idle once the
temperature is achieved.
This is normal engine operation under cold-start conditions.
• WHAT DOES THIS DO? This reduces emissions and allows Mazda to improve efficiency.
• SHUT THE ENGINE OFF by making sure the vehicle is in Park (A/T) and
setting the parking brake, then push the START/STOP ENGINE button.
• ACTIVATE ACCESSORIES (ACC) by pushing the START/STOP ENGINE button once
without pushing the clutch or brake pedal.
• TURN THE IGNITION TO THE ON POSITION by pushing the START/STOP ENGINE button
twice without pushing the brake pedal.
EMERGENCY ENGINE STOP
Pushing and holding the START/STOP ENGINE button or repeatedly pushing the START/
STOP ENGINE button while the engine is running will turn the engine OFF. Use only in case
of an emergency.
NOTE:
You can drive the vehicle during AWS activation; there is no need to wait.
The engine may not start if the key cannot be detected. The key indicator light may flash
RED or “Key not detected” may be displayed if the key is placed in the cup holder.
If the START/STOP ENGINE button indicator light flashes AMBER, this could indicate a
problem with the engine starting system. You may not be able to start the engine or
switch the ignition to ACC or ON. Have your vehicle inspected at an Authorized Mazda
Dealer as soon as possible.
START/STOP ENGINE
Button Indicator Light
2941702_18a_Mazda3_SSG_042517.indd 5
4/25/17 5:00 PM