Scheduled Maintenance; Scheduled Maintenance (Mexico); Maintenance and Care- Page 5

Chart symbols:

I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.
R: Replace
C: Clean
L: Lubricate
T: Tighten

Remarks:

*

1 Reset the engine oil data whenever replacing the engine oil regardless of the message/wrench indicator light

display.

*

2 Also inspect the air conditioner drive belts, if installed.

If the vehicle is operated primarily under any of the following conditions, inspect the drive belts more often
than the recommended intervals.
a) Driving under dusty conditions.
b) The vehicle is idled for long periods or driven at low speeds.
c) Driving for long periods in cold temperatures or driving regularly for short distances only.
d) Driving under extremely high temperature conditions.
e) Driving continuously in mountainous regions.
f) Driving for long period in extremely wet or heavy rain condition.

*

3 Use of FL-22 is recommended when replacing engine coolant. Using engine coolant other than FL-22 may

cause serious damage to the engine and cooling system.

*

4 According to state/provincial and federal regulations, failure to perform maintenance on these items will not

void your emissions warranties. However, Mazda recommends that all maintenance services be performed at
the recommended time or mileage/kilometer period to ensure long-term reliability.

*

5 Inspect a spare tire if installed.

*

6 If this component has been submerged in water, the oil should be replaced.

*

7 Check the tire repair fluid expiration date every year when performing the periodic maintenance. Replace the

tire repair fluid bottle with a new one before the expiration date.

▼

Scheduled Maintenance (Mexico)

Vehicles utilizing the vehicle status monitor feature:
The vehicle status monitor feature alerts you of maintenance needs by turning on the wrench
indicator light or displaying a message in the instrument panel, or both.
Every maintenance must be done within 10,000 km or 6 months (after the previous mainte‐
nance) or when the display/wrench indication comes on, whichever comes first.
If you drive your vehicle under any of the following conditions, follow the Severe Driving
Scheduled Maintenance and replace the engine oil and filter every 5,000 km or 3 months,
whichever comes first.
Otherwise, follow the Normal Driving Scheduled Maintenance intervals.
1. The vehicle is idled for long periods or driven at low speeds, such as with police cars,

taxis, or driver's education school car.

2. Driving under dusty conditions.
3. Driving for long periods in cold temperatures or driving regularly for short distances on‐

ly.

4. Driving under extremely high temperature conditions.

Maintenance and Care

Scheduled Maintenance

6-8

Mazda3_8HE9-EA-18K_Edition3

2018-11-21 14:31:58