Brake/Clutch Fluid; Inspecting Brake/Clutch Fluid; If the brake/clutch - Page 459

SKYACTIV

-

G 2.5T

FULL

LOW

If it is at or near LOW, add enough

coolant to the coolant reservoir to

provide freezing and corrosion

protection and to bring the level to

FULL.

Securely tighten the coolant reservoir

tank cap after adding coolant.

CAUTION



Radiator coolant will damage paint.

Rinse it o

ff

 quickly if spilled.



If the “FL22” mark is shown on or

near the cooling system cap, use of

FL

-

22 is recommended when

replacing engine coolant. Using

engine coolant other than FL

-

22 may

cause serious damage to the engine

and cooling system.

If the coolant reservoir is empty or new

coolant is required frequently, consult

an Authorized Mazda Dealer.

Brake/Clutch Fluid

▼

Inspecting Brake/Clutch Fluid

Level

WARNING

If the brake/clutch 

fl

uid level is low,

have the brakes inspected:

A low brake/clutch 

fl

uid level is

dangerous.

A low level could indicate brake lining

wear or a brake system leak which

could cause the brakes to fail and lead

to an accident.
The brakes and clutch draw 

fl

uid from

the same reservoir.

Inspect the 

fl

uid level in the reservoir

regularly. It should be kept between

the MAX and MIN lines.

The level normally drops with

accumulated distance, a condition

associated with wear of brake and

clutch linings. If it is excessively low,

have the brake/clutch system

inspected by an Authorized Mazda

Dealer.

Maintenance and Care

Owner Maintenance

6-21

Mazda3_8JM2-EA

-

20H_Edition1_new

2020-7-10 17:21:34