Owner Maintenance- Page 299

2006 Mazda MAZDA5 Owners Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

Mazda3_8U55-EA-05G_Edition3.pdf
background image

Black plate (299,1)

2. Turn the socket and bulb assembly

counterclockwise and remove it.

3. Disconnect the bulb from the socket.

4. Install the new bulb in the reverse order

of removal.

Overhead light (Rear)

1. Wrap a small flathead screwdriver with

a soft cloth to prevent damage to the
lens and remove the lens by carefully
prying on the edge of the lens with the
flathead screwdriver.

2. Disconnect the bulb by pulling it out.

Edge

3. Install the new bulb in the reverse order

of removal.

Trunk light(4 Door)

1. Press both sides of the lens cap to

remove it.

2. Disconnect the bulb by pulling it out.

3. Install the new bulb in the reverse order

of removal.

Luggage compartment light (5 Door)

1. Insert your finger as shown in the

figure and remove the unit.

2. Wrap a small flathead screwdriver with

a soft cloth to prevent damage to the
lens and remove the lens by carefully
prying on the edge of the lens with the
flathead screwdriver.

Maintenance and Care

Owner Maintenance

8-51

Mazda3_8U55-EA-05G_Edition3 Page299
Tuesday, September 13 2005 10:45 AM

Form No.8U55-EA-05G

Detailed Information for 2006 Mazda MAZDA5 Owners Manual

Lists of information found in 2006 Mazda MAZDA5 Owners Manual - Page 299

  • 2. Turn the socket and bulb assembly counterclockwise and remove it.
  • 3. Disconnect the bulb from the socket.
  • 4. Install the new bulb in the reverse order of removal.
  • 1. Wrap a small flathead screwdriver with a soft cloth to prevent damage to the lens and remove the lens by carefully prying on the edge of the lens with the flathead screwdriver.
  • 2. Disconnect the bulb by pulling it out.
  • 3. Install the new bulb in the reverse order of removal.
  • 1. Press both sides of the lens cap to remove it.
  • 2. Disconnect the bulb by pulling it out.
  • 3. Install the new bulb in the reverse order of removal.
  • 1. Insert your finger as shown in the figure and remove the unit.
  • 2. Wrap a small flathead screwdriver with a soft cloth to prevent damage to the lens and remove the lens by carefully prying on the edge of the lens with the flathead screwdriver.