Flat Tire- Page 221
2007 Mazda MAZDA5 Owners Manual Built After June 1
Black plate (222,1)
q
Jack
To remove the jack
1. Remove the cover.
2. Turn the wing bolt and jack screw
counterclockwise.
Wing bolt
Jack screw
To secure the jack
1. Insert the wing bolt into the jack with
the jack screw pointing down and turn
the wing bolt clockwise to temporarily
tighten it.
2. Turn the jack screw in the direction
shown in the figure.
Wing bolt
Jack screw
3. Turn the wing bolt completely to
secure the jack.
NOTE
If the jack is not completely secured, it could
rattle while driving. Make sure the jack screw
is sufficiently tightened.
Maintenance
l
Always keep the jack clean.
l
Make sure the moving parts are kept
free from dirt or rust.
l
Make sure the screw thread is
adequately lubricated.
7-4
In Case of an Emergency
Flat Tire
Mazda5_8X91-EA-07E_Edition1 Page222
Tuesday, June 26 2007 8:47 PM
Form No.8X91-EA-07E
Detailed Information for 2007 Mazda MAZDA5 Owners Manual Built After June 1
Lists of information found in 2007 Mazda MAZDA5 Owners Manual Built After June 1 - Page 221
- 1. Remove the cover.
- 2. Turn the wing bolt and jack screw counterclockwise.
- 1. Insert the wing bolt into the jack with the jack screw pointing down and turn the wing bolt clockwise to temporarily tighten it.
- 2. Turn the jack screw in the direction shown in the figure.
- 3. Turn the wing bolt completely to secure the jack.
Related Documents for 2007 Mazda MAZDA5 Owners Manual Built After June 1
All trademarks are property of their respective owners. Tightrope
Interactive