Authorized Mazda Dealer.- Page 305

2009 Mazda MAZDA5 Owners Manaul

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

9. Customer Information
background image

Black plate (305,1)

3. Locate the position of the suspected

fuse by using the chart inside the fuse
block cover.

4. Pull the fuse straight out with the fuse

puller provided on the inside of the
engine compartment fuse block cover.

5. Inspect the fuse and replace it if it's

blown.

Normal

Blown

6. Insert a new fuse of the same amperage

rating, and make sure it fits tightly. If it
does not fit tightly, have an expert
install it. We recommend an
Authorized Mazda Dealer.
If you have no spare fuses, borrow one
of the same rating from a circuit not
essential to vehicle operation, such as
the MIRROR or CIGAR circuit.

CAUTION

Always replace a fuse with one of the
same rating. Otherwise you may
damage the electric system.

Replacing the fuses under the hood

If the headlights or other electrical
components do not work and the fuses in
the cabin are normal, inspect the fuse
block under the hood. If a fuse is blown, it
must be replaced. Follow these steps:

1. Turn off the ignition switch and all

other switches.

2. Remove the fuse block cover.

3. If any fuse but the MAIN fuse is

blown, replace it with a new one

of the

same amperage rating

.

Normal

Blown

Maintenance and Care

Owner Maintenance

8-43

Mazda5_8Z98-EA-08F_Edition1 Page305
Friday, May 30 2008 9:27 AM

Form No.8Z98-EA-08F

Detailed Information for 2009 Mazda MAZDA5 Owners Manaul

Lists of information found in 2009 Mazda MAZDA5 Owners Manaul - Page 305

  • 3. Locate the position of the suspected fuse by using the chart inside the fuse block cover.
  • 4. Pull the fuse straight out with the fuse puller provided on the inside of the engine compartment fuse block cover.
  • 5. Inspect the fuse and replace it if it's blown.
  • 6. Insert a new fuse of the same amperage rating, and make sure it fits tightly.
  • 1. Turn off the ignition switch and all other switches.
  • 2. Remove the fuse block cover.
  • 3. If any fuse but the MAIN fuse is blown, replace it with a new one of the same amperage rating .