Black plate (245,1)
NOTE
l
This mode may not be usable depending on
the portable audio device to be connected.
l
Before using the auxiliary jack/USB port,
refer to the instruction manual for the
portable audio device.
l
Use a commercially-available, non-
impedance (3.5
) stereo mini plug for
connecting the portable audio unit to the
auxiliary jack. Before using the auxiliary
jack, read the manufacturer's instructions
for connecting a portable audio unit to the
auxiliary jack.
l
To prevent discharging of the battery, do
not use the auxiliary input for long periods
with the engine off or idling.
l
When connecting a device to the auxiliary
jack or USB port, noise may occur
depending on the connected device. If the
device is connected to the vehicle's
accessory socket, the noise can be reduced
by unplugging it from the accessory socket.
l
Insert the plug to the auxiliary jack/USB
port securely.
l
Insert or pull out the plug with the plug
perpendicular to the auxiliary jack/USB
port hole.
l
Insert or remove the plug by holding its
base.
q
How to use AUX mode
Audio Unit
Audio Control
Switches
1. Switch the ignition to ACC or ON.
2. Press the power/volume dial to turn the
audio system on.
3. Press the source change button (
) of
the audio unit or the mode switch
(
) of the audio control switches
on the steering wheel to change to the
AUX mode.
NOTE
l
When the device is not connected to the
auxiliary jack, the mode does not switch to
the AUX mode.
l
Set the volume of the portable audio unit to
the maximum within the range that the
sound does not become distorted, then
adjust the volume using the power/volume
dial of the audio unit or the up/down switch
of the audio control switch.
l
Audio adjustments other than audio volume
can only be done using the portable audio
device.
l
If the connection plug is pulled out from the
auxiliary jack while in AUX mode, noise
may occur.
Interior Comfort
Audio System
6-51
Mazda5_8DH4-EA-13H_Edition3 Page245
Tuesday, January 14 2014 9:20 AM
Form No.8DH4-EA-13H