Interior Comfort; Interior Equipment; Accessory Socket- Page 194

6-54

Interior Comfort

Interior Equipment

Form No. 8R29-EA-02I

The ignition switch must be in the ACC or 
ON position.
Only use genuine Mazda accessories or 
the equivalent requiring no greater than 
120 W (DC12 V, 10 A).

When placing an electrical device (e.g. 
cellular phone) in the tray which is 
connected with the accessory socket, pass 
the plug cord through the slot in the cap.

1. Open the lid by pulling the upper 

release catch.

2. Remove the tray mat.

3. Using a coin, turn the cap 

counterclockwise (about 45

°

 from the 

closed position) and remove it.

4. Open the tray by pulling the lower 

release catch.

Accessory Socket

To prevent accessory socket damage or 
electrical failure, pay attention to the 
following;

•

Don’t use accessories that require 
more than 120 W (DC12 V, 10 A).

•

Don’t use accessories that are not 
genuine Mazda accessories or the 
equivalent.

•

Close the cover when the accessory 
socket is not in use.

•

Correctly insert the plug into the 
accessory socket.

NOTE

To prevent discharging the battery, 
don’t use the socket for long periods 
with the engine off or idling.

CAUTION

Cap slot, closed

Cap slot, opened

J56J_8R29_EA_02I_Edition4.book  Page 54  Monday, April 21, 2003  3:44 PM