Owner Maintenance; Inspecting Power Steering Fluid ; Power Steering Fluid- Page 231

8-17

Maintenance and Care

Owner Maintenance

Form No. 8R29-EA-02I

▼

Inspecting Power Steering Fluid 
Level

2.3-liter engine

Inspect the fluid level in the reservoir at 
each engine oil change with the engine off 
and cold. Add fluid if necessary; it does 
not require periodic changing.

The level must be kept between MIN and 
MAX.

Visually examine the lines and hoses for 
leaks and damage.

If new fluid is required frequently, consult 
an Authorized Mazda Dealer.

3.0-liter engine

Inspect the fluid level at each engine oil 
change. Add fluid if necessary; it does not 
require periodic changing.

The level must be kept between the H and 
L marks.

Visually examine the lines and hoses for 
leaks and damage.

1. Park on a level surface, well off the 

right-of-way, and set the parking brake 
firmly.

2. Turn off the engine and allow it to cool.

3. Remove the filler cap and attached 

dipstick.

4. Wipe them clean and put them back.

5. Remove again and inspect the level.

6. It must be between H and L. Add fluid 

if necessary.

Don’t overfill.

If new fluid is required frequently, consult 
an Authorized Mazda Dealer.

Power Steering Fluid

To avoid damage to the power steering 
pump, don’t operate the vehicle for 
long periods when the power steering 
fluid level is low.

NOTE

Use specified power steering fluid 
(page 10-3).

CAUTION

High

OK

Low

Tighten

Loosen

J56J_8R29_EA_02I_Edition4.book  Page 17  Monday, April 21, 2003  3:44 PM