Your Vehicle; Detection Areas; Without Navigation System:- Page 9

Feature Highlights

13

NOTE:

Do not rely completely on the BSM system and be sure to look over 

your shoulder before changing lanes:

• 

The BSM system can assist the driver in confirming the safety of the surroundings,  

  but is not a complete substitute. 
•  The driver is responsible for ensuring safe lane changes and other maneuvers. 
•  Always pay attention to the direction in which the vehicle is traveling and the  
  vehicle’s surroundings. 
•  The BSM system does not operate when the vehicle speed is lower than about  
  20 mph (32 km/h).

Turning BSM System Off

To manually turn the BSM system off, push the BSM OFF switch on the dash. 

The BSM OFF indicator will illuminate in the instrument cluster when the BSM 

system is off. The BSM system will automatically turn on the next time the
vehicle is started.

14

Your Vehicle

Detection Areas

PORTABLE AUDIO PLAYER INTEGRATION USING THE AUX JACK

Your vehicle is equipped with an AUX or auxiliary jack 
that will allow you to play your portable audio player 
through the vehicle’s audio system. Learn the system 
when parked and do not let it distract you while driving. 
Refer to the Owner’s Manual for additional information.

NOTE:

You will need a cable with an 1/8 inch mini stereo 

plug to connect your portable audio player into the aux jack.

  1

  Locate the AUX jack inside the center console. 

2

  Plug 1/8 inch mini stereo plug into the portable 

audio player and into the AUX jack. Turn portable audio player on. 

3

  Turn the vehicle audio system on.

4

  • 

Without Navigation System:

 Push AUX (or CD/AUX) button on  

   audio system 

OR

 push MODE button on steering wheel controls until  

   “AUX” is displayed.
  • 

With Navigation System:

 Push SOURCE button on audio system, 

   then push AUX1 on screen 

OR

 push MODE button on steering wheel 

   controls until “AUX1” is displayed.
 

5

  Use the portable audio player controls to play music.

Temperature  

Display  
(Driver)

Audio

INFORMATION DISPLAY 

Temperature

Display

(Passenger)

Trip Computer/ 

Clock

Climate

Control

BLIND SPOT MONITORING (BSM) SYSTEM

The Blind Spot Monitoring (BSM) system is designed to assist the driver 
by monitoring the blind spots to the rear of the vehicle on both sides.

  •  If your vehicle speed is 20 mph (32 km/h) or more, the BSM will warn 

you of vehicles in the detection area by illuminating the BSM warning 
lights located on the left and right door mirrors.

  •  If you operate a turn signal in the direction of an illuminated BSM 

warning light, the system will also warn you with a beep and warning 
light flash.

  •  BSM sensors are located under the left and right rear bumper areas. 

The BSM system may not operate properly if the rear bumper gets too 
dirty, so keep the rear bumper area clean. 

Please refer to your Owner’s Manual for complete details.

IMPORTANT:

 Set the volume level on your portable audio player to the highest 

level before distortion starts, then adjust the volume on the audio system.

NOTE:

 Information display contents vary depending on vehicle grade.

 P